Double-Lok

PRODUCT DESCRIPTION

A metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel can be used on new construction as well as retrofit on existing structures. This panel design provides a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift).
Gauge: 24 (Standard) with 22 gauge available on request
Lengths: 55' maximum is standard but longer lengths available by special request.
Fasteners: Concealed fastening system with floating clips. The clips are available as floating or fixed. Two different clip heights are available to allow for insulation.
Finish: Galvalume Plus® and Architectural Series.
Usage: New and retrofit applications.
Limitations: Recommended for roof slopes of 1/4 : 12 or greater. When using the fixed clip we recommend for double slope buildings 200' wide or less and single slope buildings 100' wide or less. (May vary upon extreme weather conditions.) Oil canning is not a reason for rejection.

FEATURE

 

BENEFIT

No panel penetration is required over the building envelope other than at the end laps, and panel ends which are connected by a compression joint. Specially designed to seal out the elements.
Panel side laps arrive at the job site containing a pre-applied sealant. Contributes to the system's weather tight construction and ease of installation.
Optional product and weathertightness warranties. Severe weathertightness and additional customer confidence.
Factory notched at both ends with pre-punched holes. Field installation can commence or finish from either end of building or on both sides simultaneously.
End laps have a 16 ga. backup plate with pre-punched holes. Solid connection at end laps and proper fastener spacing. The prepunched holes improve installation and ensures proper panel placement.
High or low clips. Accommodates variety of insulation systems including 1" thermal spacers at the purlins.
UL 90. Lower insurance costs.
80% less exposed fasteners than traditional side lap panels and all fasteners are long life. Increased weathertightness.
Signature® 300 paint system. 25-year finish warranty.
The side lap has been tested for air infiltration and water penetration under ASTM E283 and E331 methods. Minimal air infiltration and water penetration and acceptability among
specifiers.